Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation, window repairs it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor and could be trampled under.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It's crucial to act when you realize that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an experiment fit. The joint at the corners of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's crucial to take action. Windows that leak water do are not just a cause for destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the problem is, the old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with ease It could be hinges at fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. Changing a window hinge is essentially a very simple procedure, but it is easier with someone else to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain manner or because of poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. First, the hinges because of wear and tear, could become misaligned. This will cause a gap to form between the sash and the frame. If they are damaged beyond repair, it might be necessary to have them realigned. Second, the interlock can be unbalanced. This is located on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures, and reduce draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be hung over your window repair near me sill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will provide a great level of insulation and security for your home. It is crucial to recognize that all windows have a life span and they may reach the point when it's more cost-effective to replace them rather than fix them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.