Sash Lock Door Handles

If you're looking to improve the security of your home without compromising aesthetics, go for sash lock door handles. They can be used with a mortice lock or sash locks and can also be combined with the nigh latch to offer additional security for doors.

The handles consist of a handle/lever on backplates and are typically used with a three or five lever mortice lock. They can be paired with the tube latch.

Lever Lock Handles

There are a variety of lever door handles to match any home decor. The rustic lever locks are very popular in both farmhouse and modern homes. Classic lever handles can be round or spherical, and are easy to hold. They are simple, affordable, and suitable for any home design. Choose satin nickel or polished chrome handles for a classy style. These finishes are easy to clean and are durable. Antique bronze and polished Brass are also options. Many handles have a decorative design, such as small amber worm eyes, or long-horned crystals. Some levers feature pins, stars or other shape molded in the bottom.

To replace the lever lock door handles you must have the right screwdriver, or tool to remove them. You might require an awl or nail based on the model and style. Some lever handles feature a small notch or hole on one side of the base which can be used to break it open.

Once you have the right tool Follow the instructions of the manufacturer to take off your old handles. Make sure the spindle is in place on the new lever. Doors that are morticed (cut into the door) for previous latches or locks and must be fitted to a specific spindle size. The majority of lever handle manufacturers use the standard spindle for door handles.

If you are replacing a sash lock door handle the handle that was previously used must be removed, and the tubular latch bolt, which is inside the door, must be disconnected from the strike plate inside the door frame. The latch bolt has to be inserted through a hole in the frame of the door and connected to the strike plate.

When installing a new lever door handle it is crucial to remember that all ADA (Americans with Disabilities Act) approved handles are designed to be operated by hand and should not require users to grip tightly or twist their wrist. To meet ADA compliance standards, the lever door handle must not be operated with the thumb and finger, or even the entire hand.

Sash Lock Handles

The main function of sash lock door handles is to pull the sashes moving together tightly to create a seal. This helps to keep the temperature of the home and prevents drafts. These locks are great for doors that do not call for a keyed lock.

Sash locks are sometimes called mortice sashlocks and combine a latch and dead bolt into a case that is fitted to the surface of a door. They are often used in conjunction with door handles and are available with a wide range of options.

Lever lock handle operates with a lever on a backplate cut out below it, which allows the use of a key to operate the mortice window sash replacement lock. This lock is typically used on doors that are not locked like those in living rooms and dining rooms. However it is also possible to use with a tubular lock to create an extra secure door.

They are designed to hold the sash in place for multiple times, and have hooks that fit inside the keeper. They come in various styles and designs that can be fitted into various window sash replacement types, such as sliding or hinged casement windows. Some are made from cast aluminium while others are made of brass or wrought iron. These are available in various finishes to match the other elements of the door furniture such as escutcheons that protect the keyhole.

3 lever sash locks can be used on doors inside however they are not suitable for external doors since they don't provide the level of security required by insurance companies. They also have a lower resistance to forced entry, which makes them more vulnerable than their certificated 5 lever counterparts.

A door sash that has five levers is the ideal option for doors that are external. It offers higher levels resistance to forced entry, and is more difficult to pick or bypass. These locks feature an upgraded design that's been tested and certified to comply with stringent security, fire and disability regulations.

The first step in replacing a sash lock handle is to remove the old fastener by removing the screws from each end. Make sure you have a screwdriver on hand, and carefully separate the parts to ensure that there is no damage. Use a pencil to mark the location of the screw holes so that you can place the new fastener in a correct manner when you are putting it on. Remove any dust or flickers of paint before screwing the new fastener in. It is important to test the handle to ensure it operates correctly and creates a tight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism which is located inside a door, and is operated by turning your handle. It is designed to close the door however it does not lock the door like mortice locks do. They are typically used for doors with internal doors, in which locking is not needed. They can be equipped with knob or lever handles.

Tubular latches are available in various sizes. The sizes vary from economy to the high-end architectural. The size you select will depend on the use of the door and if you require the function of a lock. For instance the bathroom door might need to have an open and thumbturn mechanism in the event of an emergency, so you will need a lockable latch.

The backset of your door will also influence the latch you choose. You should select one that has an backset measurement that is in line with the distance between the edge and the centre of your door's opening for the handle rose/knob. This will ensure that your door handle or knobs are able to operate the latch smoothly.

If you are fitting a spring or unsprung lever or door knob then it is important to select a heavy duty tubular latch that has a double-sprung follower and tongue. This will ensure a smooth action for the latch and keep it from becoming slow and unresponsive with regular use.

Once you have selected the right latch for your requirements the next step is to attach it on the door. First, make sure the latch is level with the top of the door frame/casing by making a mark on the location of the latch plate, then drilling holes for it. Countersink drill bits will aid in creating the proper recess that allows it to fit comfortably.

Once the latch is installed, you can fix it onto the door. It is important to check whether it's working properly prior to fitting the door handles and putting in the locks, so make sure to test it by opening and closing the door repeatedly. If it is not functioning properly, try lubricating it using WD40 and then attempting it again. If you continue to encounter problems then it might be necessary to talk to a locksmith or professional installer.

Keyhole Handles

The keyhole handles are used with a tubular lock installed in the door. This latch is used to open and shut the door. The handle is able to engage the latch when pushed down and releases it when pulled up. They are typically fitted for doors that are inside like those in dining rooms and living rooms. However they can also be fitted to front doors if they are coupled with the nightlatch.

Door knobs are more modern handles that incorporate a sprung lever/handle with a square or round fixing stem, and a matching thumb-turn or escutcheon. They are available in a wide variety of styles and finishes to fit different doors around the home. They can be used in conjunction with Euro cylinder locks or multipoint locking systems that provide additional security to the door. This is accomplished by locking the door at various points along the height of the door. Door handles that are compatible with the lock are required with the correct lock center dimension to accommodate the barrel.

Keyhole escutcheons cover the keyhole that is already in the door to conceal it and give the handle a more stylish look. They can be purchased as a pop-on or screw-on design, and in a variety finishes to match your door handle. Alternatively, a recessed escutcheon can be fitted to the door's edge to hide the keyhole and provide an updated look.

The majority of the handles mentioned above are designed to work with a mortice or sash lock mechanism, however certain handles are compatible with Euro cylinder locks too. These locks are installed on upvc sliding sash windows doors and require door handles with a Euro cutout for the cylinder and appropriate screw holes inside the backplate to accommodate the euro cylinder. These handles could also require an escutcheon for Euro-cylinders or a standard escutcheon according to the use.

It is essential to understand the differences between a mortice lock or mortice lock and a tubular lock, as well as the compatibility requirements for each. It is important to take into consideration the door's thickness, the door hinges and frame reinforcements, the size of the backplate to the handle, the lock's central dimensions and the screw centres on the cylinder.