Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance, you will need to find some plastic spacers that assist the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap between the door and the window is significant, you may prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, with time, they can suffer from a variety of issues like sagging. A window that is sagging can cause problems with light, draughts or even security. It's important to take action when you realize that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to access the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is essential to replace your seal as soon as you can to keep your uPVC window doctor near me waterproof and draughtproof.

uPVC handles could also become loose. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism wears out. Fortunately, it's easy to fix a loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the issue is, uPVC window repairs old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It is an easy process but it can be easier with someone else to help you hold the frame in place.

Check that the uPVC hinges open and close in the right direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should open.

The issue can be caused either by opening the window improperly or a faulty installation at the factory. This can often be resolved by sending us a photograph through our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges may also become unbalanced due to wear, which can cause gaps where the sash and frame meet. If they are damaged beyond repair, it could be required to realign them. The interlock may be misaligned. It is located on the hinge's side, and could require to be cleaned. In certain instances it might be necessary to replace these.

The seals may wear out or be damaged over time, allowing air escape. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than fix them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as you can.