How to Replace a UPVC Window Handle

If your upvc window handle is damaged, don't be concerned. Replacing a window handle made from upvc is a relatively simple task and can be accomplished in a matter of a few steps.

No matter if you have a cranked or in-line espagnolette window handle, they all feature a square spindle that protrudes from the back plate and is slotted into the locking mechanism.

Identify the type and size of the lock and handle

Over time windows' handles or locks can be damaged and lose their function. It is possible to fix this problem without having to replace the entire uPVC unit. One of the first things to do is determine the type of lock and handle you have to determine what parts will be required for replacement.

You can determine the type of handle by examining the base. A screw or pin will secure the handle to its base. If the screw is missing, this can be an indication that the handle has split off from its base section. If the handle has been split in the middle and no longer grips onto the spindle, this could also indicate that it needs replacing.

There are a variety of uPVC handles however the Espag handle is the most common. They are usually fixed by two bolts and feature a spindle that engages the lock mechanism in the frame of the window. These handles are used on uPVC tilt and turn windows.

Cockspur handles are another kind of uPVC handle. Similar to the Espag handle, but they are a little further from the frame. These handles are typically used on older uPVC window frames.

Venetian window handles are another alternative. They are similar to Espag handles, but have a flat bottom that allows them to be installed flush with the frame. These handles are a great option for homeowners who want an elegant handle that can blend in with their uPVC frames. The handles are also available in a large range of colours to match any style.

Find the spindle's measurement.

Before purchasing a new handle, it's important to understand how the original is attached. This will determine if it's too tight or loose, and if it will fit into the window frame. This can be determined by identifying the type of handle and determining the spindle's measurement. The spindle is the steel shaft that connects the handle to the lock inside the window frame. It's available in different sizes and the current industry standard being 8mm. Older handles could have 9mm of cross-section, therefore you'll need to take measurements of your old handle to ensure you get the right size replacement.

There are various kinds of window handles. The most commonly used are the inline Espagnolette handles and Cockspur handles. These handles operate an locking mechanism within the window, using shootbolt rods that lock the window when it is closed. Depending on the type of handle, they are held in place using screws or pins.

You can find replacement windows upvc window handles online and in most DIY stores. They are available in a variety of finishes, and can be used to make windows that are new or replacement. To ensure security, they can be either key-locking or a non-locking fire escape.

To take off the handle just open the window to the door and then remove all the screws holding it in place. Store the screws in a container to protect them from damage. After the screws are removed, carefully remove the handle. Find the distance from the base of the spindle to its top. This will give you the information needed to buy the correct replacement. The handle's spindle is the shaft of steel that connects it to the lock gearbox within the window frame.

Take off the handle from the old one.

The replacement of the handle of a uPVC window handle is a straightforward job that usually requires no more than five minutes using the right tools. The first step is to determine the lock type and handle, which will help you determine the best replacement. After that, weighing the spindle will help ensure that the new handle is a suitable fit. Finally, you'll need to take the handle off and replace it with the new one.

Most uPVC handles are inline Espagnolette handles, which are equipped with a central spindle that slots into the window's locking mechanism. They are generally easy to remove but might require force if get stuck. There are typically two screws that keep the handle in place which can be removed using a screwdriver or pliers. There may be a need to remove pins, depending on the type of handle.

After the screws have been removed After that, you can take off the handle. The top of the base plate will be visible once the handle is in an open position, showing two screws you can unscrew. There's also an unimportant silver or color sticker that must be removed if in place.

You can now put into the new handle using the screws that came with the old handle. Make sure the handle is in the open or unlocked position, and then align the screw holes with the holes on the window. After this is done, you can replace the caps on the screws and test the new handle to make sure that it functions properly. It's easy to change a uPVC handle, but you must do it right.

Install the new handle

It's time to install your new handle if you have successfully removed the old one from the frame. Begin by finding the screw covers and levering them out with your screwdriver. Once they are removed, put them in a safe location and proceed to the next step.

Then screw the spindle into by aligning it with the existing hole. Make sure that you align the holes of the handle with holes in the window frame. You should use a screw that is similar in length to the ones previously used or it could result in the handle not being secure.

uPVC Espag handles are fitted with a 7mm square spindle that rotates the lock mechanism fitted to the window. This type of handle can be commonly found in modern uPVC windows. uPVC Cockspur (also known as the name Cotswold) handles feature an extended, curving nose that is secured to the frame's outer or cross member of the transom bar. They are usually found on older uPVC Windows.

It's important to lock and unlock the window several times after the handle has been put in place. If everything goes according to plan, your replacement uPVC window handle should be secure and functioning smoothly. If you encounter any issues, these steps will help you determine the cause and fix it quickly. If you're having trouble with your uPVC handle or have any other glazed home improvement issues don't hesitate to call us at Bridgewater Glass for professional assistance. Our glaziers can repair or replace various window handles and frames. This makes us an ideal option for double glazing replacement window-glazing.

Test the new handle

Over time and through normal use over time, uPVC locks and handles can suffer from damage and wear and wear and tear. They can become less secure and effective, so it's important to replace them as quickly as possible. It's also a good idea to do this after you upgrade your windows, since changing your handle and lock will ensure the security of the windows you have just bought.

There are many different styles of uPVC window handles. Some are fixed with pins or screws, while others feature blades that fit into the lock mechanism. Each type has its own method of replacement, so it is important to know which kind you have before working on it.

The most popular kind of window handle is the espag. They're usually found on the latest uPVC Windows. The spindle extends from the handle into the lock gearbox, and it activates the locking system when you open the window. They're also easy to remove however, you must take care not to damage the mechanism or the handle while taking them off.

Cockspur window handles are a popular option for uPVC windows. They're fixed by a spur that hooks onto an elongated striker plate that is attached to the frame. When you close or tilt the window, it activates the locking mechanism. This kind of handle is more difficult to repair than other types however, it's still an ideal choice for Recommended Resource site many homes.

Venetian window handles are fixed by two bolts and have a low projection from the frame, in contrast to the Espag handle. They are ideal if you need an flush handle that blends in with your uPVC windows. They're an excellent choice for residential and commercial properties.