ghost ii immobiliser Immobiliser 2

Guards your vehicle against key cloning and stops thieves from driving it using your original keys. Our most recent immobiliser connects to your vehicle's CAN data network and a unique PIN has to be entered to start the engine.

Ghost unlike trackers, doesn't emit radio frequency signals and cannot be identified by diagnostic tools. It also has no indicators in the form of LEDs or buttons that give the impression that it is in your car or van.

Anti-key Cloning

The Ghost immobiliser was designed to stop key cloning. This device is connected to your vehicle's data network CAN and creates a unique pin code using the factory buttons in your dashboard and steering. This prevents the thief from being able to start your car. If the wrong PIN code is entered, your car isn't able to start which makes it impossible for them to leave with your joy and pride.

Ghost immobilisers are new technology that is extremely hard for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or taken, the ghost immobiliser is a discreet electronic device that isn't recognized by ordinary thieves since it doesn't emit radio signals and operates in a silent manner.

The next generation of immobilisers are capable of protecting your vehicle from a range of threats like cloned keys, key-hacking and relay attacks. It can also stop thieves from stealing keys or replacing your ECU because it won't permit them to start the car without first entering the correct PIN code.

Unlike other immobilisers, the Ghost Immobiliser 2 (Https://Taylor-Coyne.Hubstack.Net/Ghost-2-Immobiliser-Review-Whats-New-3F-No-One-Is-Discussing/) doesn't require a remote or key fobs for operation. It is able to be deactivated via the driver's mobile using a simple app. This is ideal the time you have to give your car away for valet parking or servicing without the key fobs.

The Autowatch Ghost-II is the latest version of our revolutionary ghost immobiliser. It is designed to make it as simple and user-friendly as possible and yet be as secure as possible. This is accomplished by integrating the Ghost-II into the vehicle's data network CAN, meaning that there are no additional wires to hide or be easily identified. It has built-in features that allow you to disarm the Ghost-II simply by connecting to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the newest method employed by professional car thieves to steal cars. Thieves are able to access your vehicle's OBD port with little more than a laptop, an application, and a few cables which can be purchased on the internet for less than PS50. Once they have access, they can do anything they want including resetting your vehicle's fault codes, tuning your car, or taking it away in under a minute.

If you have a Ghost immobiliser, it can stop your car being stolen with this method by making sure that a unique PIN sequence is entered on the fob of your key in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. This is completely undetectable by any RF scanning technology or code grabbing. It has a Service/Valet Mode that allows your vehicle to start without the PIN code.

To utilize an OBD hacking device, you'll need to have a laptop that has software capable of interpreting the OBD protocol. This is available for less than PS100 on eBay or Amazon. You will also need an OBD cable that has OBD pins that are connected to the CAN bus, these can be found on Amazon/Ebay for around PS50. The next step is to connect the cable into the wire harness of your vehicle, for example, in the radio wiring harness.

Once the hacker gains access to the OBD port of your vehicle, they will send diagnostics to the system at a high baud rate, which will crash the car's CAN and stop the system from functioning. This can cause your car's engine to stop or lock up.

No need to purchase additional remotes or key fobs

An immobiliser for your car is a excellent piece of anti-theft technology that is used by billions of modern vehicles around the world. Utilizing engine ECU software to stop cars from starting if a false transponder signal is transmitted to it, an aftermarket immobiliser is an excellent method of protecting your vehicle.

However, it could be simple for a burglar to circumvent an immobiliser system if they have access to the code to deactivate it. A thief could easily remove the battery from many key fobs by squeezing them open. They could then employ an instrument to take out the circuit board inside an immobiliser and ghost Immobiliser 2 replace it with blank. Then, they'll be in a position to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is done by a discrete and silent data loop in the CAN which is not detected by diagnostic tools like the ones used by high-tech thieves. It does not also utilize a traditional key fob with LED indicators, which means it can go undetected at sight.

You may need to deactivate Autowatch's Ghost 2 auto protection at certain times like during valet parking or a service job. The ghost CAN immobiliser has a dedicated mode for this, referred to as 'Service Mode' which can be activated with just pressing a button on your smartphone. The car can still be operated however its maximum speed will be restricted to 36 mph for added security.

Contact us today to schedule an appointment for a demonstration in our workshop. A member of our team will give you the entire process of the system's operation and provide you with your owner manuals, installation certification, Ghost 2 emergency card and a security guarantee.

Simple PIN code change process

Ghost is a next generation device that secures your vehicle without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicles CAN data network and a personal PIN code is programmed into it by pressing buttons on your steering wheel and the dash. The device doesn't emit RF signals, so it is not able to be tampered with. This makes it unrecognisable by sophisticated scanning or code grabbing technologies that modern thieves use.

The PIN code sequence can be changed anytime you want to block previous drivers. It even comes with an override option in the event of forgotten sequences. The installer will show you how to do this during installation. The system also includes the valet mode feature that can be used to temporarily disable the pin input sequence so that your mechanic or garage can repair the vehicle without needing to know the code. This is ideal for those who want to give their car for valet parking or service, but don't want to give away the PIN sequence.

Contrary to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that makes use of the buttons inside your vehicle to create an unique and interchangeable PIN code sequence. This sequence is entered via the smartphone app. No extra LED indicators are thrown, and your vehicle is protected without risk of being disabled.

Every vehicle is tested

A ghost immobiliser, in contrast to key fobs that require you to press buttons, is discreetly placed under the dash or steering wheel. Only you will know it's there. The device is connected to the CAN network of your vehicle and a PIN number can be programmed using buttons on your vehicle. The system won't permit your car to start until the code is entered. This means that thieves are unable to duplicate the keys of your car or use the OBD to hack into it.

Ghost can be utilized in all vehicles, including electric cars motorhomes, vans, motorhomes and bicycles. It's also extremely versatile and can be programmed to deactivate in various scenarios. For instance, it can be programmed to go into Valet mode when the car is taken to a valet park or servicing company. This means that your vehicle can be operated within a specified 30mph speed limit. The ghost immobiliser will reactivate itself once it is returned to your home.

Another great feature is that the device can be reset to your personal PIN code at any point. This is great in the event that you lose the code or in the event that the device becomes unusable.

It is also undetectable by anyone who doesn't know what it is. It does this by analyzing the buttons on your steering wheel and dashboard and then using the information they transmit to determine the button that was activated. This makes it a secure and reliable security option that can't be tampered with by RF scanning, jamming or door lock pick sets.