Window Repairs

Window repairs can save homeowners money and help keep their homes warm. In the event of serious damage, such as broken glass or a damaged frame, a window repair near me replacement could be necessary.

But many other issues can be fixed to prolong the life of your windows. Some common issues include:

Cracked or broken panes

Cracked window glass can be caused by a lawnmowers who throws rocks at the wrong time or a tree branch being blown by strong winds. This is not only visually terrible, but it could also lead to higher energy bills as the broken pieces allow cold air into your home. Luckily, it's typically easy to fix windows with cracked panes.

Start by carefully removing glass with gloves and safety sunglasses. You may have to use an utility knife to remove old glazing compound or putty around the frame's edges. Next, use a soft paper towel or cloth to wipe the surface of both the glass and the frame's wood.

Once the area is clean then apply a waterproof silicone caulking on the frame's perimeter. This will prevent water from entering the frame through the crack and causing further damage.

If you have double-pane glass, cracks that are not treated properly could weaken the gas layer between the panes, making your windows less insulative. If the crack is severe enough that it is threatening the structural integrity of the window or the pane inside is not there, you may need to call a professional.

Thermal stress cracks may also occur when there's a significant temperature difference both inside and outside your home. The glass is then able to expand and shrink. If the cracks are on two sides of a window it is recommended to replace it rather than try to repair it.

If your windows are cracked and not quite ready to be replaced Clear tape can do a decent job of preventing the crack from spreading and preventing bugs from entering cold air. You can also cut an area of nylon stocking or tarp sufficient to cover the crack, and Window Repair stick it to the wall using duct tape. This isn't a long-term solution however it's a great solution in a pinch and keeps insects and cold air away from your home. If you notice cracks on the windows of your old ones You should consult the local company to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a common problem with windows. It can affect the appearance of a house and it can also pose an hazard to safety. It is possible to repair damaged wood. First, you will need to make sure that the root of the rot has been dealt with. This can be accomplished by examining for roof leaks, missing gutters, cracked caulking and any other areas that allow water to get into the wood.

The next step is to remove the rotten parts of the window repair frame. This can be done with the claw hammer, chisel, or rasp. After removing the decayed wood, you'll have to replace it with new wood. Pre-treated wood is recommended for this task, since it will resist decay. If you are unable to replace the rotted timber then you can use wood filler and hardener to reinforce the damaged area. Many hardware stores will carry this type of product. Follow the directions on the label of the product to ensure the best results.

After you have repaired the damaged areas of the window sill, it is crucial to protect the area. This can be done by applying an water-resistant wood sealant. Sikkens for instance, is a great product to apply.

Make use of a two-part epoxy to safeguard the wood from further damage. It is easy to apply and provides an excellent finish. It is important to follow the directions on the label. After the epoxy filler has dried, you are able to sand the surface of the wood. It is recommended to begin with a rough grade of sandpaper before moving to a smoother grade.

You do not want to expose the damaged part to further moisture. Therefore, it is an ideal idea to cover the area that has been repaired with an oil-based primer which will help protect it from moisture. Then, you can reapply the waterproof wood sealant.

The W won't open

There are a variety of reasons a window won't open. Wood frames can warp during rainy weather, or the house could have settled or someone could have closed it for security reasons. However, with a little patience and the right tools, most windows that are stuck can be opened.

One of the main causes of windows that won't open is accumulated debris or gunk on its moving parts. Acme Glass notes that dirt and grime builds up over time on sliding tracks, hinges, and locks. Additionally, metal hardware may get rusty when in contact with humidity or direct sunlight. Keeping these areas lubricated with spray grease can help to prevent the oxidation process and ensure that your Window repair is operating properly.

Stuck windows can be the result of an unintentional break or loosening of the pulleys used to raise and lower the window. These parts can lose tension and become obstructed when they are situated higher than two floors above the surface.

If you're having difficulty opening windows, try using a pry bar to gently force the window to open a bit at one time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Alternatively, try running a hair dryer around the edges of the frame for a few minutes to warm the wood and assist it to move more easily.

Another issue with windows that won't open is a defective spring that stops the window jamb from rising or lowering. You'll need to refer to your owner's guide for more information depending on who made your windows.

If you've tried cleaning the moving parts of your windows and lubricating them, but they're still not opening It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to useless because windows that aren't properly shut could make your home vulnerable to water damage and burglary. Contact our team today for more information on our replacement windows as well as our services!