Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall onto the cloth instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your home until a professional is able to repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap is large, you might think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a number of problems that include sagging. A sagging window can cause problems with light, draughts, and even security. If you find that your upvc window repairs window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll have to open the window so that you can access the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. It is important to replace your seal as quickly as you can to keep your upvc window repairs near me window waterproof and draughtproof.

uPVC handles can also become loose. Most often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The corners of the sash should align with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal than the frame. This can be easily fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it blows open with the breeze. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung upvc window repair near me windows that use hinges and, like all mechanical parts, they will wear out over time. It's very simple to change the hinges on a window however it is easier if someone else helps hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrows on each hinge. This shows which way the window should open.

The issue could be caused by opening the window incorrectly or a faulty installation at the factory. Sending us photos through our website can often solve the issue. We are more than happy to offer suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window repair near me sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges may also become unbalanced due to wear, causing gaps where the sash and frame meet. If they are beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window repairs, can also be misaligned, and again it is possible to give them a clean but in some instances it could be necessary to get them replaced.

The second most frequent reason for draughts is window seals. They are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to realize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than fix them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as possible.