Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. However when you have double-pane windows that are held in place by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation you'll need to find some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap between the door and the window is substantial, you may want to use security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. It's crucial to act when you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, tighten the screws to hold them in place.

If you can't reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your upvc window repairs near me window watertight and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have loosened over time, but it could also be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. First, you'll need to shut the window and then perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if wake up every morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the problem the caulking used previously may require removal before a fresh layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze, it may be hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It is an easy process but it can be easier to do with someone else to help you hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused either by opening the window incorrectly or a faulty installation in the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause an opening to appear where the sash meets the frame. These can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also be misaligned, and again it may be possible to just give them a clean but in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and lessen draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be put on the windowsill on top. They will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach the point when it's more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional immediately.