Sliding Glass Patio Door Repair

If your sliding glass patio doors are squeaking or sticking, or not operating smoothly, they may require repair. The weather strip on sliding patio doors can also break down allowing air in.

These issues are usually easy to fix. Here are some suggestions on how to fix your patio glass doors.

Dirty or Damaged Tracks

Over time, dirt, dust and even rust may build up on the sliding door's track and sill, which may make it difficult to open and close the door. Begin by cleaning your tracks thoroughly. Mix warm water and non-abrasive cleaner in a bucket. Dip a soft cloth in the mixture and scrub your tracks and sill. Make sure you get into the corners and other difficult to reach places with the butter knife wrapped in cloth to get into the nooks and crevices of the door jamb, if needed. Rinse the tracks and sill with clean water after scrubbering them.

Give the rollers and tracks an extensive oiling. This will help them slide easier when the door is closed or opened. Use silicone-based lubricant, or a similar product to lubricate the tracks and other moving parts of your patio doors. Once the lubrication has dried you can open or closing your sliding glass door to check how it operates now that it is properly lubricated.

If your sliding glass door is still stuck even after you've cleaned the tracks and applied lubrication, there may be more issues to consider. You may need to replace the rollers, or adjust the track height or position. A professional can determine whether this is the case and can provide assistance in the event of need.

If your patio door is leaking, you have a bigger issue which must be addressed immediately to prevent the growth of mold and structural damage, as well as water damage throughout the home. A leaking patio door can be caused by a variety of issues, including obstructions, damage to the frame and track, or improper installation. While you can sometimes correct these issues with DIY solutions however, it is generally recommended to contact an expert for assistance. A professional will inspect the patio door that has started to leak and fix it to stop future leaks and damage from water. They may also recommend replacing the entire frame of the patio door with a a more durable model, made from durable materials.

Damaged Rollers

As time passes and with regular use, the bottom rollers on sliding glass patio doors could get damaged. If your door is difficult to open, you might have to replace these parts. You might also notice that the door is difficult to open due to the absence of oil lubrication. Lubricating the sliding glass patio door can prevent friction and snags.

Utilizing a vacuum with a long attachment or a soft, gentle brush with hot, soapy water is a great way to remove any debris stuck in the track of your sliding glass patio door repairs door. After cleaning the tracks, you can apply an item made of silicone to decrease friction and make your sliding glass patio door easier to open.

Before you attempt to replace your sliding glass patio door rollers, it is essential to look for any visible damage to the wheels. If you don't see any dents or cracks, you may simply need to re-lubricate the mechanism. After re-lubricating your door, it is recommended to clean the track before reinstalling. This will stop the new rollers from being placed on a dirty track that could cause them to wear out very quickly.

Replacing a sliding glass patio door roller could be an easy and affordable DIY project, but it is something that most homeowners should not do on their own. Patio doors are heavy and the safety glass that is tempered could break if handled incorrectly. This job should be performed by an experienced handyman or with help from a person who is skilled.

To begin to remove your patio door repair service near me door, find a screw hidden in a hole that runs along the frame's bottom. This is the height adjustment screw for the rollers. By turning the screw clockwise, you lower the rollers, whereas turning counterclockwise raises them. After you have loosen the screws, the patio door should fall off of its track.

The locking mechanism is not aligned correctly.

As time passes the moving components that comprise a sliding glass door's lock mechanism can get misaligned. It could be due to natural wear and tear or an accidental force, this may cause the door to become difficult to open or close, causing a safety hazard for pets and children as well as decreasing the energy efficiency of your home.

A misaligned lock could cause the door to feel loose and shaky, which can allow drafts into your home. A loose screw at the bottom of the latch can cause the issue. A simple fix can restore the latch's secure fit. In some instances it might be necessary to replace the lock.

If the lock isn't securing in any way, but the strike plate sticks when you try to open the door, humidity may be causing swelling of the wood and cause the latch to slide off its track. If the problem persists even after lubrication, the latch might need to be replaced.

Doors that slide are a practical and attractive feature to any home. However they can also be a source of frustration in the event that they're not functioning correctly. Cleaning the rollers and adjusting lock mechanisms are two proactive actions that can keep these sliding glass patio glass repair near me doors running smoothly and efficiently for many years to come.

It is best to get an expert glass patio door glass repair near me repair service in case you have broken or cracked glass. Replacing a glass pane requires breaking the seal, removing shattered glass shards and installing a new window, which isn't an easy task for novices. While you wait for repairs, a piece plywood can serve as a temporary barrier to protect pets and children from the glass that has been broken. Similarly, a crack in the window itself can be dangerous and should be repaired as soon as is feasible. Smaller cracks are usually repaired using clear epoxy, but a larger break or shattered pane will likely require replacement to ensure the door's safety and insulation capabilities. A reputable glass repair service for patio doors is able to take care of all of your glass needs quickly and safely.

Sticky Tracks

It is not a good idea to forcefully opening or closing sliding glass doors. They are costly and heavy. It can damage the glass door and worsen the problem. Be patient when attempting to solve the issue by taking the door off, examining the operation of the track and making any needed adjustments or repairs.

It is the easiest way to check the wheels and tracks by removing your door and laying it on a flat surface such as a set, or sawhorses. This is a two-person job as the door is heavy and could cause injuries if it falls onto the person who is in the area.

After the door has been safely removed, you can use a vacuum cleaner to get rid of the big chunks of dirt in the tracks. The tracks are cleaned with a stiff brush and hot soapy water.

When the track is clean it's a good idea to apply a silicone spray or clear wax to it. This will make it glide better without attracting dirt or grime like oil-based products.

You should also lubricate the top and bottom of the track and the mating edge of both door tracks where they meet the frame of the door. These areas tend to stick when the track is cleaned however, after spraying it with lubricant and rubbed with a rag it should move more easily.

You should also examine the rollers of your sliding door to determine if they're damaged or worn. If they are, you'll have to replace them in order to allow your door to move freely. Vern's Glass, in Victorville has replacement rollers that fit a variety sliding glass door designs.